Conveyor cover is also called rain cover, color steel rain cover, belt conveyor rain cover and conveyor dust cover. During the conveying process, It reduced the loss and waste of the conveying materials so that it is not only makes conveyor belt safer and more reliable, but also can prolong the service life of belt conveyor. What is more, it exerts an enormous function on environmental protection. GFRP conveyor cover is a conveyor mechanism that composed of a pair of conveyor idler supported on the rack. According to customer's needs, GFRP conveyor cover can fit Various types of belt conveyor, stainless steel track conveyor and chain conveyor. The drive device can choose different type of reducer, infinity speed regulating motor and frequency transformer as energy source, and there is no need to stop machine when changing speed. The whole equipment consists of frame, Lifting and sewing machine and column rack. There are two kinds of pedestal, fixed and mobile pedestal and also a lifting mechanism. GFRP conveyor cover adopt a unified installation connection, because every accessories are interchangeable. All GFRP conveyor cover are produced by advanced machinery, the surface of cover naturally forms a dense arc arch reinforcement, with uniform distribution. The whole cover is hyperbolic arch, which is a scientific design, mechanical strength, strong combine between the cover top and bottom and good anti-wind waterproof performance. Between the observation window, check door and shield waveform bonding surface, there embedded with special waveform elastic rubber strip so that makes good sealing. The thickness of the cover material, the opening cover, the interval distance set by the observation window and the size of the cover, can be flexibly adopted. All the accessories have been anticorrosive treatment before put into market and we can also make abnormal rain cover products and baffles according to user’s needs. The fixed conveyor cover skeleton is a connecting angle steel or z-section steel, and its length of which is the same as the length of the conveyor cover device. Welding of connected angle steel or Z-shaped steel on both sides of the groove steel or small steel angle of the conveyor rack. If it is required to install the support angle steel, welded to both sides of the rack, and then the connecting angle steel or Z-section steel is welded to the support angle steel. In the four types of conveyor cover, the fixing cover and the open and closed cover are made of FRP, with 9 fixed covers, one open and closed cover in each of the 10 covers, or two types of conveyor cover interchange. When installing, Pressing the open and closed cover on both left and right adjacent stationary covers with a coincident length of one wave or two wave spacing. It is worth noting that place the side of the open and closed cover with a hinge on the non-passable edge of the conveyor, and place the side of the latch on the side of the conveyor. Using the self-tapping nail to secure the conveyor cover on the connecting angle steel or z-section steel, and each piece cover should install 4 fixed points.
We are a company that produce belt machine cover, glass fiber reinforced plastic cover and arc cover and they are applicable to power plants, cement plant, coal mine, steel mills, wharf and other major factories and mines enterprises. The advantages of rainproof, dustproof and windproof conveyor belt can effectively reduce the loss of goods in the conveying process, make the conveyor belt safe and reliable in operation, play a greater role in protecting the environment, and reduce a large number of operating costs for enterprises.