This article focuses on central chain bucket elevator’s structural features and structural composition, you will more understand central chain bucket elevator through this article.

The central chain bucket elevator has the features of large conveying capacity, high lifting height, stable and reliable operation and long service life. It is suitable for conveying powdery, granular and small pieces of non-abrasive and abrasive materials such as coal, cement, stone, sand, clay, ore, etc., because the characteristic of drag chain, it is allowed to convey materials with higher temperature.

In one of the customer cases , a central chain bucket elevator is used to convey materials mainly with water slag and fly ash. After being put into use, due to the large water content of the slag, slag is formed in the bucket, and the thickness of the slag is up to 300 mm, and the bucket is worn. After the slag was cleaned up, there occurred three times chain breaking in the subsequent use of the machine. Through investigation, it was found that the bucket was not properly installed, and the chain design also had drawbacks.

Central chain bucket elevator produced by Henan Excellent Machinery Co., Ltd. is advanced technology, excellent craft, reliable performance.

Central chain bucket elevator produced by Henan Excellent Machinery Co., Ltd. is advanced technology, excellent craft, reliable performance.

The structure need be understood clearly, then model selection, it is very important, so this article focuses on Z-type bucket elevator’s structure and model selection.

Because of its importance, this article focuses on Z-type Bucket Elevator’s installation requirements and maintenance items.

This article mainly describes the sequence and operation management of the Z-type bucket elevator. The main contents are: Always check the connection parts of the equipment (including the basic screws) for looseness. Always check the operation of the bucket elevator to see if there is any abnormal sound.

The machine casing is combined in a sectional style, with optional horizontal length and lifting height. The layout is flexible, and it occupies less space; it saves plant space and reduces the depth of pits; the machine is safe, reliable, smooth and noiseless, does not spill, discharge, dust, and is easy to remove and easy to repair. It is an ideal new type of material conveying equipment.

The bucket of Z type bucket elevator picks up the material from the lower storage, as the chain is lifted to the top, bypassing the top wheel and then turning down, the bucket elevator pours the material into the discharging equipment. The chain drive bucket elevator is generally equipped with two parallel drive chains with a pair of drive sprockets on the upper or lower side, and a pair of reversing sprockets on the bottom or the top. Also Z type Bucket elevators are generally equipped with elevator housing plates to prevent dust from flying in the bucket elevator.

The maintenance of Z type bucket elevator is very important in the process of operation, because the Z type bucket elevator has the following characteristics: one is 24 hours non-stop operation, and the other is its load is very large. Third, the lifting height is often very high, so the load intensity is very high, then you can imagine a high-speed operation equipment running 24 hours a day, the production efficiency of the conveying materials is also very high, thus the strength of the loss of each components must be very high, so maintenance is crucial.

This article focuses on pan conveyor’s classification and maintenance, you will see many kinds of pan conveyors, you will also know how to do the maintenance for it.

This article focuses on pan conveyor’s advantages and application , you will more understand pan conveyor and its applied range.

Belt conveyors and pan conveyors, which are two different conveyors, although they are all in the conveyor category. However, belt conveyors are suitable for light delivery with low noise and low cost, while pan conveyors are suitable for large or heavy transport or assembly. It is also longer than the belt conveyor in its service life.

Pan conveyor is a material handling machine that continuously transports materials on a certain line, also known as a continuous conveyor. Pan conveyor can be transported horizontally, obliquely and vertically, or it can form a space conveyor line, which is generally fixed. The conveyor has a large conveying capacity and a long transportation distance, and can also complete several process operations simultaneously in the conveying process, so the application is very extensive.

LD pan conveyor is suitable for non-viscous solid materials such as boiler ash, cement clinker, slag, coke, gravel, etc., especially some high temperature, large volume, lump block, sharp angle and hard abrasive material, which suitable for working environment with large transportation demand.

The pan conveyor is a device for conveying materials horizontally or obliquely according to the hopper running along the guideways. It is widely used in the transportation of various loose materials in power station, mine, coal and other industries, such as boiler ash, cement clinker, slag, coke, gravel, etc., especially some materials with high temperature, large capacity, lump block, sharp angles and hard abrasion.

Apron feeder is used in many industrial fields. This paper focuses on apron feeder’s performance advantages and our company latest and most efficient models.

The drive is a device that powers the traction chain. It consists of a motor, a reducer, a frame, and a drive chain. The motor is connected to the reducer. Power is transmitted to the traction chain through the two sprockets and the drive chain.

The apron feeder is a feeding device commonly used in a concentrator. Apron feeders are generally divided into three types: light-duty, medium-duty and heavy-duty.

The apron feeder is a high-end product in the feeder series, and is used in large-scale concentrator projects and construction projects. In order to make the production line configuration more flexible and to meet more customer needs, the series of heavy-duty plate feeders came into being.

The apron feeder is a kind of continuous conveying material machinery, In order to ensure the normal use of apron feeder during the production process, the equipment is designed to meet the process requirements safely and reliably.

It is crucial and important to apron feeder installation and commissioning, the user must need to understand the installation order and commissioning process that he would operate the apron feeder correctly without mistakes. What’s more, understand its characters would greatly your work efficiency.

The structure of the head, tail, receiving point (including multi-point receiving), tensioning device, etc. of the tubular belt conveyor is exactly the same as ...

The belt is rolled into a tubular shape and can be bent in any direction with a small radius of curvature, thereby expanding the use range of the conveyor, and providing a theoretical basis for the layout design of the curved section of the pipe conveyor. It can solve problems and create value for users in a better way.